🎉 Up to 70% Off Selected ItemsShop Sale
Black Laser Marking Spray (8.5oz)
- MATERIAL QR CODE. Say goodbye to the hassle of finding the optimal processing parameters. It only takes two steps: place the QR code sticker/card into the machine, then click the "Refresh background" button and immediately apply the optimal processing parameters. You can click here to learn how to use automatic QR code recognition with the P series or F series. (*Please note that the automatic scanning function requires a camera. Non-camera machines (F1/S/M1U/D) can manually scan the QR code to quickly obtain the optimal processing parameters.)
-
Important Usage Instructions:
- This spray contains powder and should be shaken well before use, but avoid shaking too vigorously, as this may cause a bulge at the bottom. Shake until you hear the glass bead moving, it’s ready for use.
- During use, the spray should not be shaken vertically, but rather from side to side.
- Additionally, the spray should not be exposed to direct sunlight.
- Black laser marking spray is applied to the surface of the material and then combined with the xTool machine, which creates a unique black pattern with high contrast and durability. It can be applied to a wide variety of materials such as most metals (stainless steel, copper, aluminum), glass and ceramics. Please note that the spray is initially white in color, but will turn black after laser engraving. It can help the Blue-light Laser to achieve engraving on glass, but the glass will not show a black effect when engraving is used on it.
- Compatible with CO2 (25-watt minimum), Diode (10-watt minimum), and Fiber (10-watt) lasers. Easy and quick to use, just simply spray and engrave to create black marks.
- Shake the bottle for 2-5 minutes before use for best results. The best spraying distance is 6-8 inches. After spraying, dry at room temperature for 10-30 minutes, or use a heat gun to speed up drying. The spray should be completely dry before engraving with the xTool machines. Remove any remaining marking spray with water and a rag after engraving.
- Please note that if you don't use it all at once, be sure to clean the valve by turning the can upside down and pressing the nozzle until only gas comes out after use. The next time you use it, it will not be clogged to avoid the situation of not being able to spray. You can avoid possible leaks by shaking it a few times after each use and pressing the nozzle a couple of times to get any powder that may be attached to the gasket inside the valve out.
-
xTool Selected Materials are terrific partners of xTool laser machines. It is recommended that you open the package within one week of receiving the goods. If you find any quality problems with the materials, please contact us, xTool Selected will provide you with a 30-day unconditional return and exchange service.
$9.00
Original: $29.99
-70%Black Laser Marking Spray (8.5oz)—
$29.99
$9.00
Description
- MATERIAL QR CODE. Say goodbye to the hassle of finding the optimal processing parameters. It only takes two steps: place the QR code sticker/card into the machine, then click the "Refresh background" button and immediately apply the optimal processing parameters. You can click here to learn how to use automatic QR code recognition with the P series or F series. (*Please note that the automatic scanning function requires a camera. Non-camera machines (F1/S/M1U/D) can manually scan the QR code to quickly obtain the optimal processing parameters.)
-
Important Usage Instructions:
- This spray contains powder and should be shaken well before use, but avoid shaking too vigorously, as this may cause a bulge at the bottom. Shake until you hear the glass bead moving, it’s ready for use.
- During use, the spray should not be shaken vertically, but rather from side to side.
- Additionally, the spray should not be exposed to direct sunlight.
- Black laser marking spray is applied to the surface of the material and then combined with the xTool machine, which creates a unique black pattern with high contrast and durability. It can be applied to a wide variety of materials such as most metals (stainless steel, copper, aluminum), glass and ceramics. Please note that the spray is initially white in color, but will turn black after laser engraving. It can help the Blue-light Laser to achieve engraving on glass, but the glass will not show a black effect when engraving is used on it.
- Compatible with CO2 (25-watt minimum), Diode (10-watt minimum), and Fiber (10-watt) lasers. Easy and quick to use, just simply spray and engrave to create black marks.
- Shake the bottle for 2-5 minutes before use for best results. The best spraying distance is 6-8 inches. After spraying, dry at room temperature for 10-30 minutes, or use a heat gun to speed up drying. The spray should be completely dry before engraving with the xTool machines. Remove any remaining marking spray with water and a rag after engraving.
- Please note that if you don't use it all at once, be sure to clean the valve by turning the can upside down and pressing the nozzle until only gas comes out after use. The next time you use it, it will not be clogged to avoid the situation of not being able to spray. You can avoid possible leaks by shaking it a few times after each use and pressing the nozzle a couple of times to get any powder that may be attached to the gasket inside the valve out.
-
xTool Selected Materials are terrific partners of xTool laser machines. It is recommended that you open the package within one week of receiving the goods. If you find any quality problems with the materials, please contact us, xTool Selected will provide you with a 30-day unconditional return and exchange service.
